Search

Hardwire Electronics PDM 15

SKU: HW-PDM-15
$995.00
The PDM 15 is our mid-range PDM, offering all the features of the PDM 10 but adding additional outputs for a total of 15 full configurable and programmable outputs, and 2 canbus networks. The PDM 15 can support a total of 180A of current in the electrical system. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. The PDM 15 includes the Deutch connectors and pins to get set up and running. Contact us to have your PDM preconfigured before shipping.
*
+ -

Included

  • PDM15
  • 4x Deutch DT Connectors + contacts
  • USB memory stick with PDM software and instructions preloaded
  • USB Cable
  • M8 ring terminal & cover

Advantages Over Fuses and Relays

  • Greatly simplifies system wiring and reduces system component count.

  • Reduces the weight of the electrical system.

  • Provides increased reliability over traditional systems using mechanical relays. 

  • Solid state technology removes the problem of relay contact corrosion and relay bouncing in vibration heavy applications.

  • Smart features such as indicator and wiper motor modes remove the need for extra control units.

  • Current draw can be monitored and logged to pre-emptively detect faults.

General Features

  • Size: 200x160x54mm

  • Weight: 615g

  • Operating Temperature: -55°C to 90°C (-67°F to 194°F)

  • Construction: Glass Fibre Reinforced Plastic

  • IP Rating: IP67

  • Connectors: Deutsch DT 12-Pin

  • Update Rate: Up to 800Hz

Inputs

  • Type: 16 Analogue inputs, which can also serve as digital inputs

  • Measurement Range: Each input can measure between 0V-6V

  • Measurement Resolution: 10-Bit, or 0.01V

  • Protection: Fully protected for input voltages from -24V to 40V 

  • Added Features: Current sourcing for ground switch detection. Configure as active high or low. Configurable Hysteresis voltage. Latching or momentary operation.

Outputs

  • Type: 15 High side outputs 80A peak, 20A continuous.

  • Combined: 180A combined output maximum current

  • Output Current Control Steps: 100mA (0.1A)

  • Protection: Each output is overcurrent, overtemperature, load dump and reverse polarity protected.

  • 5V: One 5V, 500mA output for supplying external sensors/Hardwire Electronics CAN Keypad

  • Added Features: Outputs can be configured to stay on for a specified time after the input is removed, useful for thermo-fans. Outputs can be retried multiple times after an over-current event is detected.

Data Logging

  • Storage: 128Mb of onboard flash storage for logging PDM data

  • Speed: 0.1Hz to 50Hz

  • Viewing: Data can be downloaded and graphed via the Hardwire Electronics PDM configurator software

Functions

  • Output Functions: Each Output can be switched with a user defined function

  • Logical Operators: AND, OR, NOR, XOR, NAND, NOR, >, >=, <, <=, Equal, Not Equal

Bluetooth

  • Version: Bluetooth v4.0

  • App: Available in future software update

USB

  • Type: USB 2.0 Compliant Mini-B

  • Driver: Integrated driver for Windows 10

CAN Bus

  • Interface: 1x CAN2.0A/B

  • Bus Speed: 50kbps, 100kbps, 125kbps, 250kbps, 500kbps, 1000kbps

  • Input Stream: 15 Inputs, fully customisable variable parsing with bit masking and math functions

  • Output Stream: 15 Outputs, fully customisable CAN frame construction with math functions

Products specifications
CAN Bus Enabled Yes
IP Rating IP67
Connectors Deutsch DT 12-Pin
Number of Inputs 16
Number of Outputs 15
Number of CAN Bus Inputs 15
Number of CAN Bus Outputs 15
Maximum Output Current (Combined) 180A
Maximum Output Current Per Output (Peak) 80A
Maximum Output Current Per Output (Continuous) 20A
Weight 615g
*
*
*
*
Customers who bought this item also bought

Blink Marine 8 Key CANopen Keypad

Control your PDM or other CAN bus enabled devices with the Blink Marine 8 key keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Will work with AIM, Hardwire, and many other CANbus enabled PDM's.
$299.95