Confirmed to work with:
AIM Sportline PDM's (PDM08 and PDM32)
Hardwire PDM (PDM15, PDM25, PDM25+)
Customers who bought this item also bought
Control your PDM or other CAN bus enabled devices with the blink marine 12 key keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Confirmed to work with AIM, Hardwire, HTG GCU's, plus many more.
The PDM25 V2 is the newest PDM (Power Distribution Module) from Hardwire Electronics, a natural update to the outgoing PDM25 V1. With new features such as High/Low side outputs, 9 Axis IMU, improved CAN bus and more. A PDM is a device used to replace conventional relays and fuses in a vehicle electrical system. The Hardwire Electronics PDM takes inputs from physical switches, analogue voltages, or the CAN bus, and provides power to different electronic devices such as radiator fans, fuel pumps and head lights. The current being drawn from each connected device is continuously monitored. If the measured current is too high due to a fault, the PDM switches off the respective output to prevent further damage to the wiring loom or the connected device. The PDM can then retry the output to see if the fault has cleared. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. Includes the Deutch connectors and pins to get set up and running.
