Wiring

Looking for the easy button? This is it. Send us your stock S2000 Engine harness and we'll convert it to run a K series with an AEM Infinity or a Haltech Elite 1500. No jumpers, no adapters. Typical turn around time is 2-3 weeks. Email us for more info/questions.

Finally, a complete Plug and Play wiring solution for your 00-05 S2000 Kswap. No jumpers, no adapters, and a base map included! ALL factory gauges work, AC pre-wired and setup in base map. Harness is all Tefzel wire, Raychem DR25, labeled and what most would call "MilSpec."

This 00-05 Chassis jumper is used with the Rywire K Series Engine Harness. Does not work with OEM K20 Engine Harnesses.

Rywire 02-04 K-Series RWD Mil-Spec Eng Harness w/02-04 Wiring/K-Pro ECU/S2K Trans/K-Series TB/Intake To complete your Kswap wiring, you'll need to use the Rywire specific chassis jumper.

AEM Infinity 5 Plug & Pin Kit. Includes 80 pin connector with cover, 80 small pins, 1 micro relay with pins and 30 sealing plugs

Running a K series engine harness but using your stock S2000 (00-05) throttle body? You will need to convert the TPS Connector to the older B series style. Or just use this quick and easy jumper/adapter. plug in and go.

Want to make your own engine harness? Here's a head start. Flying lead harness pre-wired with power/grounds, Wideband, AEMnet, and ECU Connector kit.

Haltech AMP 26 & 34 Pin 4 Row 3 Keyway Superseal Connector Set Plug & Pins Suits: E8/11, PS1000/2000 and Elite 1000-2500 ECUs.

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! Colour coded and labelled wires that match the detailed wiring diagram for a confusion free construction process. The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. HARNESS FEATURES This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle. Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits.

Suits: Honda S2000 AP1 (00-04), AP2 (05) non-DBW Includes: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. Notes: Non Drive-By-Wire (DBW) application only. ADAPTOR OVERVIEW This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution. A simple Haltech Plug'n'Play product that allows plugs directly into your car's factory harness. The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle. When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.

Running the RSX Engine Harness/ECU? This is the chassis adapter to plug it into your S2000. Only works for 2000-2005 year S2000's. IF USING RYWIRE ECU HARNESS- you will use the other Rywire Specific Jumper Harness.

Looking to run multiple AIM CAN devices- You'll most likely need this. If using the AiM PDM's, you'll need this to run additional CAN devices beyond the AiM GPS.

Bosch LSU 4.9 Wideband Replacement Sensor Only

Suits: For use with up to three CAN devices. Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12") Notes: Direct Plug 'n' Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to connect multiple CAN devices to your ECU.

Haltech 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc)

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Diameter: 10mm (3/8")

Bosch 74mm Drive-By-Wire Throttle Body. Using this on a K24? Be sure to use the WF-Anti-VIB mounting kit.

The Antigravity Batteries AG-1201 is an extremely versatile high power and lightweight Lithium Motorcycle/Motorsports battery. It has the capability for large weight reduction in the most compact size in lithium batteries in its class. Not for a street car / daily.

The Antigravity Batteries AG-1601 is getting into the massive power arena with 480 Cranking Amps. It is the smallest lightest 16-Cell Lithium battery made. This is the go-to battery if you need very high power in a compact size. Not for a street car / daily.

Group-51R Battery, OE S2000 fitment battery. NEW! Lightweight Lithium Batteries with Wireless Remote Built-In Jump Starting! The first Intelligent Lithium-Ion Automotive Battery that won’t leave you stranded!

Group-51R Battery, OE S2000 fitment battery. NEW! Lightweight Lithium Batteries with Wireless Remote Built-In Jump Starting! The first Intelligent Lithium-Ion Automotive Battery that won’t leave you stranded!