Customers who bought this item also bought
Adapter plate to mate your K series Engine to the stock S2000 Transmission. Includes the alignment dowels for both sides and hardware to bolt adapter plate to the engine. Hardware may vary depending which K series block you are using. Included hardware is tested and setup to work with JDM K24a engines.
This is still to date, our preferred method of doing the Kswap into an S2000. This allows you to keep your factory Fuel system (FPR, rail, Injectors), Throttle Body, TPS, MAP, Idle Valve, IAT, and everything fits like factory. The only downside is you do have to do some trimming to fit your intake manifold. [See pics]. Includes: adapter plate, 6 allen head M8 bolts. Optional Hardware pack (more details below).
Want to use that stock S2000 header? This is our preferred choice when doing a 250hp or less K Swap. Cut off that F series flange, cut the two inner runners, clock them just a touch outwards, and weld that all back together. Do it all correctly and you have perfect OEM fitment.
Want to cover up that flywheel opening on the backside of the engine. Kpower has a nice and simple solution.
