OEM Honda S2000 Clutch Disc
ACT Heavy Duty Pressue Plate.
Customers who bought this item also bought
These are the correct OEM Flywheel bolts to be used with the KSwap Clutchmaster adapter flywheel. Includes set of 8 bolts.
Clutch Masters Steel K Swap Flywheel designed to work with the adapter plate and a K series engine to S2 transmission. We strongly recommend the steel flywheel over the aluminum on K24's that are spending a lot of time in the higher RPM's. The long stroke of an inline 4 produce some intense harmonics that can result in transmitting those harmonics into your clutch, or even worse, cause loose/broken flywheel bolts. DO NOT USE your S2000 flywheel bolts. They are too long and will bottom out before properly fastening. We sell the correct bolts.
Rywire 02-04 K-Series RWD Mil-Spec Eng Harness w/02-04 Wiring/K-Pro ECU/S2K Trans/K-Series TB/Intake To complete your Kswap wiring, you'll need to use the Rywire specific chassis jumper.
Complete EP3 Idler kit to replace the power steering pump.