These are brand new OEM Unmodified parts-
PRB Type S Oil Pump
PRB Type S Oil Pump Chain
PRB Type S Oil Pump Chain Guide
PRB Type S Oil Baffle
Depending on your block, you will need to modify the oil pump slightly. If removing an oil pump with balance shafts, be sure to plug the oil feed hole for the BS.
Customers who bought this item also bought
This kit includes the basic parts you'll need to start your S2000 K20/24 swap process. Includes- Hasport K swap Engine Mounts K series engine to F series Transmission Adapter Plate ClutchMaster Steel Flywheel (We can do aluminum for cheaper but STRONGLY recommend steel) OEM Honda Flywheel Bolts (These are older B series flywheel bolts, DO NOT USE S2 Flywheel bolts with the CM flywheel)
This is still to date, our preferred method of doing the Kswap into an S2000. This allows you to keep your factory Fuel system (FPR, rail, Injectors), Throttle Body, TPS, MAP, Idle Valve, IAT, and everything fits like factory. The only downside is you do have to do some trimming to fit your intake manifold. [See pics]. Includes: adapter plate, 6 bolts, and NPT 90* coolant fitting.
USDM K series Water Pump Housing. This is what you need to convert your JDM K24 engine to use the USDM Alternator and tensioner setup. The JDM Water Pump and thermostat housing will bolt right up to this. Also includes required OEM shortened stud when converting from a JDM housing to USDM housing.
Unit2's K-Series Steel baffled oil pan - PRB PUMP Perfect OEM-Like fitment. Requires Type S oil pump setup.
