Shop

Skunk2 Alpha series 70mm Throttle body. B series fitment (same for 2000-2005 Honda S2000). Will fit the Kmiata Kswap Intake manifold. Uses B series TPS/MAP sensors. This has been the best budget throttle body we've used. We've seen many of the cheap throttle bodies stick and rattle apart. We've never had that issue with the Skunk2.

Haltech Single Channel CAN NTK Wideband Controller Kit.

Winning Formula DBW Anti-Vibration Kit for KPower Intake manifold to Bosch 70mm DBW Throttle Body. K24's are one of the worst engines for vibrations and harmonics, esp when exceeding 7500rpm's. Those vibrations get sent into the DBW and cause all sorts of issues. From mismatched TPS readings to the gears stripping. The boys at Winning Formula have developed and vigorously tested these and are proven to fix all the DBW issues. Kit includes: Intake and throttle body adapters Silicone coupler Hose clamps (QTY.2) Associated hardware with anti-vibration washers O-rings

Winning Formula DBW Anti-Vibration Kit for KPower Intake manifold to the stock FA20 DBW Throttle body. K24's are one of the worst engines for vibrations and harmonics, esp when exceeding 7500rpm's. Those vibrations get sent into the DBW and cause all sorts of issues. From mismatched TPS readings to the gears stripping. The boys at Winning Formula have developed and vigorously tested these and are proven to fix all the DBW issues. Kit includes: Intake and throttle body adapters Silicone coupler Hose clamps (QTY.2) Associated hardware with anti-vibration washers O-rings

Winning Formula DBW Anti-Vibration Kit for 00-05 S2000 intake to Bosch 70mm DBW Throttle Body. K24's are one of the worst engines for vibrations and harmonics, esp when exceeding 7500rpm's. Those vibrations get sent into the DBW and cause all sorts of issues. From mismatched TPS readings to the gears stripping. The boys at Winning Formula have developed and vigorously tested these and are proven to fix all the DBW issues. Kit includes: Intake and throttle body adapters Silicone coupler Hose clamps (QTY.2) Associated hardware with anti-vibration washers O-rings

Roll Bar Mount for Aim SmartyCam.

Bosch 74mm Drive-By-Wire Throttle Body. Using this on a K24? Be sure to use the WF-Anti-VIB mounting kit.

Hawk Performance 500ml Bottle Hi Temp Race Brake Fluid Minimum dry boiling point of 608°F / 320°C Make sure you flush out that old 15+ year old brake fluid before hitting the track. We recommend minimum 3 bottles to flush out your old stock fluid with this high temp racing brake fluid.

Hasport Kswap S2000 Engine Mounts, U62a

Radium Fuel pressure Regulator, using an OEM Bosch FPR top. Includes 2 high pressure ports and one return. 6an Fittings included.

Radium Fuel pressure Regulator, using an OEM Bosch FPR top. Includes 2 high pressure ports and one return. 6an Fittings included.

Suits: Honda S2000 AP1 (00-04), AP2 (05) non-DBW Includes: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. Notes: Non Drive-By-Wire (DBW) application only. ADAPTOR OVERVIEW This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution. A simple Haltech Plug'n'Play product that allows plugs directly into your car's factory harness. The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle. When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.

ARP 80-00 Honda M12x2.85inch 5 Wheel Stud Kit Replacing your wheel bearings? Might as well install some fresh studs at the same time. Sold in packs of 5.

Looking for the easy button? This is it. Send us your stock S2000 Engine harness and we'll convert it to run a K series with an AEM Infinity or a Haltech Elite 1500. No jumpers, no adapters. Typical turn around time is 2-3 weeks. Email us for more info/questions.

With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-colour shift light bar, the iC-7 connects directly to all current Haltech ECUs via a CAN network.