It's pretty obvious the rear brakes on an S2 are probably not up to hot lapping. While most upgrade the front brakes, you really shouldn't forget about the rear (which should probably get addressed first). This kit, developed by Sakebomb Garage, utilizes an RX8 rear brake caliper along with Mustang GT vented rear rotor. Best part about this kit, you can retain a fully working E-Brake! This kit comes with all hardware and adapters needed. Includes fresh remanufactured RX8 Brake calipers and brackets. **Only thing missing is brake pads***
Running a K series engine harness but using your stock S2000 (00-05) throttle body? You will need to convert the TPS Connector to the older B series style. Or just use this quick and easy jumper/adapter. plug in and go.
OE Replacement rear brake rotor, non directional. The OEM brakes with good pads and fluid work amazing on an S2000. BUT, if your doing a track day you better always bring spare rotors (and pads) with. On our S2000 race cars, we'd replace these every 2 race w weekends (8-15min races).
The OE S2000 rear wheel hubs are unfortunately a weak point when combined with track use and meaty tire setups. The primary failure point is from the lightening cut-outs on the backside of an already thin hub flange. Karcepts S2000 Rear Hubs are filled in solid and built with an increased flange thickness. Rotor retention screw holes have also been eliminated. These 3 simple geometric adjustments have reduced stresses by two-fold over the OE units. Along with design optimization, Karcepts hubs are machined from chromoly steel and heat treated for an even greater endurance limit. Direct replacement for Honda 42210-S2A-000 Solid 8.75mm thick hub flange (9% thicker than OE) CNC turned from billet chromoly steel Oil quenched and tempered for improved fatigue strength Precision ground bearing journals Maintains OE rotor-centric attributes and offset Fits all 00-09 Honda S2000 without modification Wheel studs not included Sold in pairs
Moroso K series Road Race Baffled Steel Oil Pan. This is our pan of choice for heavily tracked S2000 K-swapped cars. Large capacity helps keep the oil temps stable and plenty of oil in the sump at all times. Must have Type S Oil pump conversion.
Safecraft Racing Net (generally used for door positions, ease of driver changes), Push-Button Release, Kevlar Webbing. Meets FIA 8863/2013, Meets SFI 37.1.
Simply the best automated camera system you can put in your race car for this price point. Pair this with your AIM Solo or dash and have fully automatic instant video with data overlay. No software editing, no charging batteries, no record button. Everything just happens for you! This paired with an AIM PDM+Dash Kit and you're fully set! AND Now in Full HD image 1920 x 1080 resolution, at 30 fps!