Shop

Using Honda's well engineered F Series header, we cut off the F series flange and adapt the header to a K Series flange. This is by far our favorite option when K Swapping your S2000. The OEM Header is built extremely well, double wall for best heat management, never cracks, and just fits like an OEM part. Requires a good Core.

LifeLine Copse 6pt Motorsport Harness. 6point, 2inch, pull-down straps. FIA 8853-2018

1650cc Honda/Acura K, S2000 (06-09) FIC's Data Matched high performance fuel injectors featuring high impedance Bosch core, E85 compatible, lifetime warranty. Fuel Injector Clinic's 1650cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. The 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!

Hawk's new ER-1 compound brake pads for OEM S2 brake setup. Designed specifically for endurance racing.

Is your S2000 starting to shake under power or even light load? What about when cornering? This is the quick and easy fix. Axle spacers will push the axle cup further inwards giving it a nice fresh surface. Install time of 10-20 minutes and get back to enjoying that smooth Vtec again.

These are used (but OEM HONDA) B Series TPS Sensors. Same sensor that comes on 2000-2005 S2000's but clocked slightly different. This is the TPS you need if you want to rotate the TPS towards the back of the car. Makes for a cleaner look and keeps TPS/wiring away from the accessory belt.

Includes a NEW Reman AC Compressor. Honda 00-09 S2000 A/C Hose Relocation Kit.

The stock S2000 rear toe arms tend to wear out and are not serviceable. Not only on the ball joint end, but the bushing tends to tear creating a lot of deflection when loaded. These Megan Racing rear toe arms work well with fixing the slop, while correcting some of the un wanted bump steer (esp on the early model S2000's).

Time to ditch those 20+ year old rubber bushings and replace with some spherical bearings. No more deflection or stiction.

Time to ditch those 20+ year old rubber bushings and replace with some spherical bearings. No more deflection or stiction.

We do NOT recommend these in the rear on track cars. Use on fronts only. Gain addition camber and/or Caster. Also helps bring the wheels more inboard allowing for more tire to fit under those OE fenders.

This is our preferred front lower ball joint. Helps correct Roll center along with additional front camber. We've ran "the other" extended ball joints and have found too them to add too much leverage on the lower spindle mounts. This leads to the spindle failing and gets very sketchy. We have yet to see a spindle failure since switching to these. NOTE: Currently out of stock. Estimated to be back in stock late September/early October (2024).

NEW OEM Honda 22810-PCY-003 Bearing, Clutch Release

S2000 Ohlins Road & Track Coilover System. Maybe the best bang per buck coilover package one can get. Ohlins DFV (Dual Flow Valve) Single bleed technology offers a comfortable yet sporty ride. This system will come with the standard 100N/mm front and 80N/mm rear spring rates. The standard valving is able to support a slight variance in spring rates. Message us if you want to do something different.

Group-51R Battery, OE S2000 fitment battery. NEW! Lightweight Lithium Batteries with Wireless Remote Built-In Jump Starting! The first Intelligent Lithium-Ion Automotive Battery that won’t leave you stranded!