Customers who bought this item also bought
This is still to date, our preferred method of doing the Kswap into an S2000. This allows you to keep your factory Fuel system (FPR, rail, Injectors), Throttle Body, TPS, MAP, Idle Valve, IAT, and everything fits like factory. The only downside is you do have to do some trimming to fit your intake manifold. [See pics]. Includes: adapter plate, 6 allen head M8 bolts. Optional Hardware pack (more details below).
RWD K Series Rear Coolant Housing - K24/20z3 RBB style. Also included is a 1-1/4" to 1-1/4" Inch Hose Barb Splice Coupler to extend your upper radiator hose. [You'll need to source a short hose with a 90* bend.]
This kit includes the basic parts you'll need to start your S2000 K20/24 swap process. Includes- RBZ Kswap Engine Mounts K series engine to F series Transmission Adapter Plate ClutchMaster Steel Flywheel (We can do aluminum for cheaper but STRONGLY recommend steel) OEM Honda Flywheel Bolts (These are older B series flywheel bolts, DO NOT USE S2 Flywheel bolts with the CM flywheel) ASM-modified 12pt 17mm for Flywheel bolts.
Adapter plate to mate your K series Engine to the stock S2000 Transmission. Includes the alignment dowels for both sides and hardware to bolt adapter plate to the engine. Hardware may vary depending which K series block you are using. Included hardware is tested and setup to work with JDM K24a engines.
