Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.
Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
| Cylinder Quantity | 4 |
| Engine Aspiration | naturally aspirated |
| Fuel Pressure | 43.5 |
| Impedance | High-Z |
| Plug and Play Adaptor | PADPJtoH4 |
| WHP on E85 at 43psi 90%DC NA | 515.60 |
| WHP on E85 at 43psi 90%DC Supercharged | 468.73 |
| WHP on E85 at 43psi 90%DC Turbo | 429.67 |
| WHP on E85 at 58psi 90%DC NA | 595.52 |
| WHP on E85 at 58psi 90%DC Supercharged | 541.38 |
| WHP on E85 at 58psi 90%DC Turbo | 496.27 |
| WHP on Gas at 43psi 90%DC NA | 670.29 |
| WHP on Gas at 43psi 90%DC Supercharged | 609.35 |
| WHP on Gas at 43psi 90%DC Turbo | 558.57 |
| WHP on Gas at 58psi 90%DC NA | 774.18 |
| WHP on Gas at 58psi 90%DC Supercharged | 703.80 |
| WHP on Gas at 58psi 90%DC Turbo | 645.15 |
Customers who bought this item also bought
Authentic real NGK BKR7EIX. These are the plugs we use on just about all K and F Series Hondas. We've ran them on boosted cars up to 500whp on stock coils and stock gap.
Want extra adjustability with that EP3 pulley? Maybe running a larger throttle body and want to move the pulley further away. Or having a hard time finding a properly fitting belt? This is the EP3 Kit you'll need! CNC cut from billet aluminum, then paired with an OEM Honda bearing cover, Gates 7rib pulley, and all new hardware. Belt not included.
Want to cover up that flywheel opening on the backside of the engine. Kpower has a nice and simple solution.
Fluidampr for Honda K series Engines Part# 570601 If you know anything about K series engines you'll know how bad the harmonics are. We highly recommend putting one of these on EVERY K-series engines.
