Rear Upper Control Arm – BRZ / FRS / GT86
Our Rear Upper Control Arm is a purpose-built upgrade designed specifically for racing, better axle clearance, and overall travel. It’s 3 lbs lighter weight when compared to the OEM upper per side (each arm is 5.7lbs) and replaces the bushing part of the arm with bearings. With our smooth adjusters, dialing in alignment is easier and more precise than ever, no fighting with jam nuts or awkward angles.
Built for both grip racing and drifting, this arm maintains proper suspension geometry under load and eliminates common axle interference issues. Every detail, from the angled adjuster design to the precision-fit uniballs, is engineered for performance, reliability, and ease of adjustment.
These arms will also fit the following chassis
- 2013+ Scion FRS
- 2013+ Subaru BRZ
- 2011+ Subaru Impreza XV Crosstrek
- 2008+ Subaru Impreza WRX
- 2008+ Subaru WRX STi Hatchback
- 2008+ Subaru WRX STi Sedan
Key Features:
Lightweight, high-strength construction
Optimized axle clearance for lowered cars
Smooth adjuster for fast, accurate camber tuning
Designed for both drift and grip performance
Direct bolt-in with factory hardware
Customers who bought this item also bought
These spherical bearing rear toe arms give you further adjustment range of your rear toe, along with adjustability for the rear bump steer. They feature a very strong and lightweight design, using 7075-T6 aluminum. The total weight per arm is 1.55lbs(0.7KG) making them lighter than the OEM arms. This product includes 2 arms, and all required hardware to install.
We've been working with FDF on this one for a while. The front lower control arm is probably the most important part of the 86 suspension puzzle. Added shim type adjustability for more camber & caster, roll center correction, high quality spherical bearings, and super durable design that doesn't utilize jam nuts or collars that seemingly always want to loosen. We have stress tested these arms on our GT86.2 test mule for a full season of abuse, not a single issue and our alignment is dead on every time.
The FDF Rear Traction Arm gives you the control to center your wheel perfectly in the wheel well after lowering your car. Featuring the same shim-block and uniball system, it allows easy fine-tuning of arm length and wheel position without sacrificing strength or precision. The traction arm weighs 2.6 lbs (1.17KG) per arm, making it extremely light for its strength. The arm offers 22mm of total adjustment, ensuring proper alignment and wheelbase correction for both grip and drift applications. Plus, all our new arms share the same shim system — meaning you can adjust your entire rear suspension setup with one set of shims. Sold as a pair.
The all new FDF Rear Lower Control Arm combines the best range of adjustability, strength, and performance in one clean design. Using a Uniball billet block and shims instead of jam nuts, this arm offers the most rigid adjustment method for racing. no bending, loosening, or flexing. The arm weighs a total is 3.65lbs (1.65KG) each making it lighter than the OEM and competitors arms. Multiple mounting points for the shock and sway bar allow you to fine-tune motion ratio, ride height, and suspension behavior without affecting coilover travel. Sold as a pair.
