F2K Plug'n Play Engine Harness & Haltech ECU

SKU: F2K_ECU_Harness

$3,595.00

A complete Plug and Play wiring solution for your 00-05 S2000 Kswap. No jumpers, no adapters, and a base map included! ALL factory gauges work, AC pre-wired and setup in base map. Harness is all Tefzel wire, Raychem DR25, what most would call "MilSpec." Wideband module is NOT included.

Qty:

+ -

Overview
Contact Us

Wiring harness is setup to plug directly into the Haltech Elite 1500 ECU.

DTM-4 with Haltech CAN/12v/Ground.

Harness Notes-

Injectors will plug into the stock S2/K Series injectors.

S2000/B-Series TPS

K Series MAP

K Series IAT

K24 Crank Sensor

K24 Knock Sensor

Wired up to retain AC

Oil Pressure Sensor pre-wired

S2000 Speed Sensor

Wiring Diagram and Base Map will be emailed once item is shipped.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

DIY Starter Pack S2000 K-Swap base kit.

This kit includes the basic parts you'll need to start your S2000 K20/24 swap process. Includes- RBZ Kswap Engine Mounts K series engine to F series Transmission Adapter Plate ClutchMaster Steel Flywheel (We can do aluminum for cheaper but STRONGLY recommend steel) OEM Honda Flywheel Bolts (These are older B series flywheel bolts, DO NOT USE S2 Flywheel bolts with the CM flywheel) ASM-modified 12pt 17mm for Flywheel bolts.

$1,250.00

OEM Honda S2000 AP1 Clutch Slave Cylinder

Is your AP2 slipping the clutch on fast shifts? upgrade to this AP1 Slave and ditch that delay valve. Do be warned- the delay valve has a purpose, and its to reduce shock to your drivetrain.

$179.95