Search

Blink Marine 12 Key CANopen Keypad

Manufacturer: Blink Marine
SKU: PKP-2600-SI
$269.95
Control your PDM or other CAN bus enabled devices with the blink marine 12 key keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Confirmed to work with AIM, Hardwire, HTG GCU's, plus many more.
*
*
*
*
*
*
*
*
*
*
*
*
+ -

Confirmed to work with:

AIM Sportline PDM's (PDM08 and PDM32)

Hardwire PDM (PDM15, PDM25, PDM25+)

HTG Tuning Gearbox Control Unit.

*
*
*
*
Customers who bought this item also bought

Hardwire Electronics PDM 25 PLUS

The PDM25+ is our top of the line PDM, offering all the features of the PDM25 but with a few added features such as PWM for soft starts. The PDM25+ has the same 2 canbus networks for easy integration with other canbus enabled devices and can support a total of 180A of current in the electrical system. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. The PDM 25+ includes the Deutch connectors and pins to get set up and running. Contact us to have your PDM preconfigured before shipping. NOTE: The PDM25+ is currently on extensive backorder.
$1,495.00

AiM PDM32 w/10" Display, 4.0M GPS

Fuses? Relays? Not anymore. If you're rewiring your entire car, you better be starting with a PDM. And AIM makes this easy by combining their easy to use dash and PDM kit. The PDM Kit includes: New INTEGRATED Power Distribution Module + PDM32 with 28 High Side Outputs and 4 Half Bridge Outputs + 4 gigabytes Datalogger + Dash controller Dash 10” GPS Module for automatic Lap Time and track position
$2,799.00

Hardwire Electronics PDM 25

The PDM 25 is our top of the line PDM, offering all the features of the PDM 15 but adding 10 additional outputs for a total of 25 full configurable and programmable outputs. The PDM 25 has the same 2 canbus networks for easy integration with other canbus enabled devices and can support a total of 180A of current in the electrical system. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. The PDM 25 includes the Deutch connectors and pins to get set up and running. Contact us to have your PDM preconfigured before shipping.
$1,375.00

DomiWorks BMW DCT PCB kit

DomiWorks PCB's for your BMW 7sp DCT Mechatronics Make the modification easier and more reliable, no splices required. The board comes with pre-installed resistors so no need to add them in your harness. Includes wires for the internal modification.
$89.00