Search

ASM K24 K20 Rear Coolant Housing for S2000 RWD

Manufacturer: ASMotorsports
SKU: ASM_Coolanthousing
$145.00
We finally made our own. A coolant housing that simply works. A complete 1pc design, solid sealing surface utilizing the OEM gasket, and standard 12mm bolts. This is the housing needed to run the K24/K20 RBB style heads in a RWD configuration. Sold as just the housing or as a complete kit for your S2000.
*
*
*
*
+ -

ASM Rear Coolant Housing.

Options Include:

OEM Honda Gasket

Coolant hose kit-  Includes 1.25in coolant hose & bleed coupler.  This allows you to simply connect your OEM S2 upper hose.  Also includes a convenient bleed port.  Also includes 12inches of heater hose.

Heater port 90* outlet or blockoff plug. 

Hardware-  x4- M12x1.25, 25mm long

*
*
*
*
Customers who bought this item also bought

RBZ S2000 to K-series AC compressor adapters

Looking to keep AC in your Kswap S2000? These simple adapters allow you to bolt your OEM S2 AC lines right up to a K series AC Compressor.
$69.99

ASM K-Series thermostat heater port adapter kit.

We're finally selling our heater hose adapter. Specifically designed for the S2000 but can still be using for any Honda K series. Includes O-ring and retaining bracket making install the easy and very straight forward. Includes 20 inches of 3ply EPDM 5/8 coolant hose and 2 hose clamps.
$37.99

DIY Starter Pack S2000 K-Swap base kit.

This kit includes the basic parts you'll need to start your S2000 K20/24 swap process. Includes- RBZ Kswap Engine Mounts K series engine to F series Transmission Adapter Plate ClutchMaster Steel Flywheel (We can do aluminum for cheaper but STRONGLY recommend steel) OEM Honda Flywheel Bolts (These are older B series flywheel bolts, DO NOT USE S2 Flywheel bolts with the CM flywheel) ASM-modified 12pt 17mm for Flywheel bolts.
$1,250.00

K2F Intake Manifold adapter plate

This is still to date, our preferred method of doing the Kswap into an S2000. This allows you to keep your factory Fuel system (FPR, rail, Injectors), Throttle Body, TPS, MAP, Idle Valve, IAT, and everything fits like factory. The only downside is you do have to do some trimming to fit your intake manifold. [See pics]. Includes: adapter plate, 6 allen head M8 bolts. Optional Hardware pack (more details below).
$135.00